1. Automatic fat tester, fully automated, the instrument set temperature control, extraction (Soxhlet extraction, heat extraction, Soxhlet heat extraction, continuous flow, etc.), rinsing, solvent recovery, pre-drying, calculations and printing in one.

2. Solvent recovery rate, recovery rate of more than 95% (solvent: petroleum ether, ether; time: 90 minutes).

3. Six stations, each station can be set individually pre-drying temperature, reduce the loss of extracted samples fat, to ensure the accuracy of the experimental results.

4. Handheld external small control panel, with calculation and printing system.

5. Program configuration, can store 500 sets of experimental programs, one-key experiment, improve work efficiency.

6. Independent lifting mode, 6 sample cups independent lifting, reflecting the sample independence, experimental safety, increase experimental accuracy.

7. Applicable to a variety of different boiling points of organic solvents, temperature control range, from room temperature to 300 ℃.

8. Built-in ether leakage monitoring system, the minimum detection limit is 90ppm (less than the Chinese occupational exposure limit), ether leakage, sound and light alarms.

9. Advanced cooling water monitoring system, condensing unit automatically prompted by water cut-off.

10. The instrument has a multi-module mode of operation, can be added with acid hydrolysis and alkali hydrolysis measurement module, to meet the different forms of fat determination.