1. Stirring barrel

(1) Shape: disc bottom R=110mm (molded)

(2) Inner cylinder = SUS 304, thickness = 4mm, 300﹟polishing treatment

2. Stirring wing

(1) Material: 1Cr18Ni9Ti 

(2) Speed: 1420rpm

(3) Structure: two-piece pulp

3. Transmission parts 

The main shaft is made of high quality 40Cr steel.

4. Discharge port device 

(1) Material: cast aluminum 

(2) Structure: manual 

5. Motor 

(1) Power: 3kw 

(2) Speed: 1420rpm 

(3) Frequency conversion speed control 3kw domestic inverter

6. Shaft sealing part 

(1) Oil seal + labyrinth seal 

(2) The oil seal is made of natural rubber 

(3) Air is blown from the labyrinth seal into the mixing drum, which prevents the possibility of powder entering the shaft seal area. 

(4) The bearings are made of NSK products from Japan. 

7. Control system 

The main electrical components are made of Chint, and the temperature control meter is made of Takasaki