IPMFP611 Pensky-Martens flash point testing is a new generation of fully automated instrument designed and manufactured according ASTM D93 standards. Used in power, petroleum, chemical, commodity inspection and scientific research departments; Apply to oil products that need to determine the flash point characteristics of petroleum products; It is suitable for the test of closed flash point temperature and danger level of oil products.
Inquire Now
· Automatic lifting, temperature control, ignition, detection, printing, cooling, etc
· Heating rate and stirring rate can be adapted to various standards
· Atmospheric pressure calibration function
· Automatically stop heating when the temperature exceeds the value
· Instrument fault self-diagnosis function
· Unique ignition design, users can switch to gas flame according to requirements
· Scanning or electronic flame scanning mode
| Temperature range | 40~370℃ | ||||
| Resolution | 0.1℃ | ||||
| Accuracy | Flash point value＜110℃, ±1℃ Flash point value≥110℃, ±2℃ | ||||
| Repeatability | ≤4℃ | ||||
| Reproducibility | ≤8℃ | ||||
| Ignition mode | Electronic ignition, gas flame | ||||
| Cooling mode | Built-in strong air cooling | ||||
| Relative humidity | ≤85RH(non-condensing) | ||||
| Ambient temperature | 10~40 ℃ | ||||
| Supply voltage AC | 220v±10% 50Hz±10% | ||||
| Power consumption | ≤500W | ||||
| Overall dimensions | 350 mm x 310mm x 300mm | ||||
| The weight of the instrument | 13.5Kg | ||||
